A Lyon Tonneau cover is an accessory that can be installed on a car, usually on the roof. A tonneau cover is designed to protect your cargo from inclement weather and thieves while still allowing easy access to your belongings. This article will review Lyon Tonneau’s Cover so you can find the best one for your needs. It will also provide useful tips for installing bed covers!
Pickup Bed for 2015-2021 F150 Tonneau Cover
- Very easy to install
- Looks great and durable
- Easy to remove when needed
- Great protect the truck bed and items in it from the elements for the most part
Lyon Tonneau Cover Review – What is it?
Protect your cargo from the elements and theft with this premium bed cover. It is waterproof, snowproof, dirt proof and will keep your truck bed dry! The electrophoretic treatment makes hardware more corrosion-resistant to ensure superior durability – don’t risk it without one today!
Lyon Tonneau Cover is a truck bed cover that protects your cargo and covers the entire bed of your pickup to keep it safe from theft, weather damage, or even just dirt. The Lyon Tonneau provides you with additional storage space for camping gear, tools, groceries-whatever you need! You can also haul larger loads without having to worry about damaging them in transit. And because it installs quickly and easily with no drilling required on most trucks*, installing one is as easy as taking off clothes at night.
Why buy a Lyon tonneau cover over other brands

The Lyon Tonneau Cover is the perfect solution to protect your truck bed from all types of weather. Able to withstand wind, rain, and snow with its waterproof construction, this cover will keep any dirt or debris off your cargo while still allowing airflow so that it’s always fresh inside.
The truck bed cover is designed to be easily installed. Nor do you need any assistance from an installer, as the design of this Lyon Tonneau Cover makes it easy for anyone with basic knowledge and physical strength.
This lightweight material also means that removing or reinstalling can happen without much trouble at all!
LED touch lamp and rubber seals are included. The best part of this light? It’s touch-activated so you can control it with just one finger! This cover is made for protecting your truck from harsh weather conditions all year round!
The benefits of owning a Lyon Tonneau Cover
It’s strong, lightweight, impact-resistant, stays cooler in the heat than aluminum.
And has a higher load-bearing capacity per weight when compared to other materials like Aluminum or Fiberglass.
Fiberglass Reinforced Polymer has a higher rigidity over aluminum or fiberglass materials with improved scratch resistance when compared to both of these metals. It also features increased load-bearing capacity at 350lb which provides significant improvement up to 200lbs from before for surface loading on its honeycomb core polypropylene system.
The hard polymer rubber corners and snap-on seals make the cover of this case incredibly water-resistant.
The improved, innovative materials used on patented folding cases ensure you get nothing but the best protection available anywhere. The latest update includes soft polymer rubbers around each corner with reinforced hinges which provide added strength and durability while remaining easy to open or close at any moment’s notice.
The Tonneau Cover’s innovative design is perfect for those who need a cover that can be installed quickly. The easy installation and no drilling need saves time and hassle. While the lightweight frame offers an easier removal process when you want to go off-roading or just enjoy your truck bed in its entirety again!
The disadvantages of owning a Lyon Tonneau Cover
Installation instructions are awful, but you may found a helpful video that made your installation process faster. This is a BI-FOLD cover that sits against the back windshield – it has one section of fixed length while the other two sections are horizontal and lose about 18″ of cargo space. A true tri-fold configuration would have been better so three panels could lay vertically over one another.
The hardware design for the latch proves to be very weird in that it does not utilize cables, as seen with most of their competitors. I only have one cable, which is utilized when pulling on each side – it released the latches inward, allowing me to flip the section back.
For this cover, you have one pull and then another pull- releasing both sides concurrently; before flipping over into an umbrella fold shape design were once inverted it locks shut using a push-button release located at the tailgate area. The lack of cables made use of my bed extenders more challenging because there are no metallic bars holding up each individual part creating resistance for pulling on them.
How to install
To install, a truck bed cover is usually put onto the truck and then rolled over to secure it in place with its own securing system on each side of the truck bed or by using straps that are placed around specific parts of the vehicle like tires or lower frame rails.

- If removing both panels, you may need help from another person who can hold it in place while you drill out any rivets remaining holding the second rail in place. This also includes pulling off fasteners that are used to attach various parts such as hinges and locks before reinstalling them after attaching all components back onto your newly installed roll-up cover.
- If you have a tonneau cover with rails that are permanently attached to the truck on one side, such as very old models or those made by Chevy trucks, installation is slightly more difficult and will require drilling out rivets from inside of your bed before taking off any fasteners holding it in place.
- Some plastic clips need to be heat sealed over where they attach to the rail in order for them not to pop back open when trying rolling down the tarp again later; this may also apply if you’re installing a new vinyl matting over top of an existing piece (more common on older model cars) although care should be taken not to damage paintwork underneath.
Be sure that all necessary hardware is included when purchasing your tonneau cover or pick up replacement clips if they are needed.
Be sure to measure the inside dimensions of your bed before ordering; there should be about a half-inch of clearance on each side and two inches at the very end in order for it does not break off prematurely from constant opening and closing while driving down rough roads.
It also makes sense that you don’t purchase one with a design that exposes the tires as this will cause them to wear out quicker, which would defeat the purpose of having a protective covering over them in the first place.”
How to avoid the installing mistakes
The installation of your tonneau cover will be the most frustrating part if you make any mistakes. Here are some common things that people do wrong, and how to avoid them:

Measure twice before drilling once. It is important for the measurements to be as accurate as possible because this is literally what keeps it on tight while driving down rough roads or when in inclement weather conditions.
Use the right screws; they should not go through metal parts like hinges, latches, etc., but rather into wood surfaces only (but first drill pilot holes). Make sure to use ample amounts of thread locking compound so that these aren’t going anywhere anytime soon! This may seem tedious at first, but it will save you time in the long run.
Use screws that are at least as large as the holes drilled, but don’t overdo it! If they’re too big, then there’s a chance for wood surfaces to be ripped out and/or metal parts to be stripped or sheared off (not good!).
Remove all old hardware before installing new bolts and covers. This is necessary so that once everything is installed, screws will not come loose due to rusting or corrosion from age.
Conclusion
This blog post has been long-form content. I have included all the necessary information and details for my readers to decide if they want to purchase a Lyon Tonneau cover or not. I hope this will be helpful when deciding which product is best for you!
Thank you so much, please leave comments below about how you liked this article! Enjoy shopping and good luck choosing your new tonneau cover 🙂
Table of Contents
FAQs
What are the dimensions of Lyon Tonneau Cover?
The length is 78.8 inches or 66-67 inches, width is 47.25 inches, and height at its highest point is 28.75 inches tall (about 20-22 inches from the ground.)
How much does a tonneau cover weigh?
Weights vary by model and customers can find this information when they go to the website but typically on average ranges 70 pounds. All weights could be slightly off depending on weather conditions as well as if it’s made out of metal or plastic which has different density levels for each one because they have their own pros/cons in terms of weight distribution. Again, these numbers will change based on the model you choose.
What does this cover do?
A tonneau cover will help reduce your exposure to UV rays from sunlight because they protect all surfaces inside your car’s upholstery, interior panels, dashboard as well as cargo area while also reducing wear and tear on these items due to things such as heat and airborne contaminants which can be harmful to both people AND their belongings. The best part about having one of these on your vehicle is that it will help protect against theft by making the surface of your truck bed more difficult to access.
How much does this cover cost?
If you want a tonneau cover for just one season, then you can purchase them at any store that sells aftermarket accessories. But if you’re looking for something made out of durable materials and with reinforced stitching. So that they last longer than most other covers (or even go through an entire lifetime), then I recommend Lyon Tonneau Covers. Since they have high-quality fabrics and designs in order to withstand wind as well as rain conditions effectively, while also being strong enough to resist tearing.